The ultrasonic cleaning system consisting of common horn type transducer, sound energy density is about 0.3~0.5 W/cm², it's enough for general cleaning, but it's hard for some industries such as filters and spinnerets cleaning.
The energy-gathered ultrasonic cleaners use high power energy-gathered transducers, after amplification of amplitude and focus of energy, the sound energy density can reach 10~12 W/cm², greatly improve the cleaning effect.
Our
composite ultrasonic cleaners are suitable for spinneret cleaning of special fiber like super fine denier, special-shaped hole and composite spinning series, energy-gathered ultrasonic cleaners applied to stainless steel sintered felt filter cleaning of silk and high viscosity polymer, etc. Anyway, for the different working coditions, we can provide the best cleaning solution for you.
- Suitable for columnar filter of slice spinning or polyester industry.
- Micro motor controls the rotation of filter.
- Capable to meet various of columnar filters.
- The tool head moves backwards and forwards through the energy-gathered ultrasonic cleaner.
2) Translational structure for spinneret cleaning
- Suitable for spinneret of spinning industry.
- Turnover is required in the process of spinneret cleaning.
- The tool head moves backwards and forwards through the energy-gathered ultrasonic cleaner.
3) Recoil typed structure for melt filter cleaning
- Suitable for filter of polyester industry.
- Back purge system lead the high-pressure water to clean the filter inside.
- Automatic clamping device are used for filters.
- Recoil cleaning should go hand in hand with Energy-gathered cleaning.
- Capable to use with "Z" travel mode.
4) "Z" travel mode for melt filter cleaning
- Suitable for columnar filter of polyester industry.
- "Z" travel mode can make ultrasonic energy fully force on filters, and clean the filters one by one.
"Z" travel diagram
5) Rotary structure for disk filter or spinneret cleaning
- Suitable for disk filter of film industry (BOPP/BOPET)
and staple fiber spinneret.
- Energy-gathered ultrasonic tool head is fixed, shaft rotates the disc filter to gain the best cleaning effect.
6) Rotary structure for disk spinneret cleaning
- Suitable for viscose or
acrylic fiber project.
- Energy-gathered ultrasonic tool head is fixed, shaft rotates the disc filter to gain the best cleaning effect.
7) Energy-gathered cleaner explosion-proof design
- Suitable for flammable and combustible project.
- The energy-gathered ultrasonic cleaner adopts the explosion-proof components and efficient ventilation.
- Configures the system of gas concentration and temperature monitoring.
- The sensor monitors the stability of cleaning liquid, once falls beyond preset limits, the cleaner will automatically cut off power and trigger alarm.
8) Dual-purpose type for columnar and disc filter cleaning
- Suitable for columnar and disc filter cleaning.
- Columnar filters and disc filters are placed in separate cleaning tank, capable to clean at the same time.
• Composite Ultrasonic Cleaning Machines
1) Structure of gantry frame
- Suitable for small-aperture or porous spinneret cleaning.
- Low-frequency energy-gathered tool head combined with high-frequency common vibration plate, better efficient.
- Cleaning both above and below, not required to turn over.
- Design of gantry frame, easy to operate flexibly.
2) Translational structure for spinneret cleaning
- Suitable for small-aperture or porous spinneret cleaning.
- Low-frequency energy-gathered tool head combined with high-frequency common vibration plate, better efficient.
- The tool head moves backwards and forwards through the energy-gathered ultrasonic cleaner.
- Cleaning both above and below, not required to turn over.
3) Z “travel mode and recoil
typed structure
- Suitable for high requirement columnar filter cleaning.
- Low-frequency energy-gathered tool head combined with high-frequency common vibration plate, better efficient.
- "Z" travel mode can make ultrasonic energy fully force on filters, and clean the filters one by one.
- Combine with recoil device, more thorough cleaning.
4) Rotary structure and explosion-proof design
- Suitable for flammable and combustible project.
- Low-frequency energy-gathered tool head combined with high-frequency common vibration plate, better efficient.
- Cleaning both above and below, not required to turn over.
- Position the circular energy-gathered tool head for cleaning, to
achieve perfect
.
5) Dual-purpose for spinneret
and ring blowing tube
- Suitable for spinneret and ring blowing tube cleaning.
- Low-frequency energy-gathered tool head combined with high-frequency common vibration plate, better efficient.
- Cleaning both above and below, not required to turn over.
- If you need to clean both spinneret and ring blowing tube, this is clearly the best choice.
Home
Downloads
Sitemap
Contact
"Z" travel diagram
